MRF 14592, Operator'S Manual

Page: 10 / 20

10
3. See the D-Ring Hitch Attachment Load Capacities
table to confirm the weight does not exceed your lift
capacity.
IMPORTANT
AVOID DAMAGE!
Use straps or chains with high enough rated capacity
to lift the load.
4. Secure the load to the D-Ring with straps or chains.
5. Raise the load, taking care not to exceed the maxi-
mum boom length or 70-degree operating angle as
shown.
Operation
1. Follow the instructions in the Installing and Remov-
ing section to install the attachment.
2. Park the loader. (See Parking Safely in this manual.)
3. Install the secondary attachment (See Installing the
Secondary Attachments).
4. Perform the pre-operation inspection.
Adjusting the Boom Length
1. Turn to unlock the sping pin assembly (A) and slide
out the manual extension tube (B) if needed.
2. Position the nearest hole in the manual extension
tube to lock the spring pin assembly into place to
secure the manual extension tube.
3. Use the loader hydraulic controls to extend the
primary (C) and secondary (D) extension tubes as
needed.
Using the Secondary D-Ring Hitch Attach
-
ment
1. Install the D-Ring Hitch Attachment (See Installing
the Secondary Attachments).
2.
Confirm the weight of the load you intend to lift.
Operating
D-Ring Hitch Attachment Load Capacities
Loader Rated Operating Capacity 2000 2500 3000 4000
Maximum Load with Boom Horizontal and Collapsed 870 lbs 1180 lbs 1490 lbs 1900 lbs
Maximum Load with Boom Horizontal and Fully Extended 280 lbs 410 lbs 540 lbs 727 lbs
Maximum Load, Boom at 70-degree Operating Angle and Collapsed 2000 lbs 2500 lbs 3000 lbs 3975 lbs
Maximum Load, Boom at 70-degree Operating Angle and Fully Extended 975 lbs 1290 lbs 1600 lbs 2040 lbs
70
0