9
Press the button once to zero the A or KW reading.
(8). RECORD button
•
Single Data Record
The clamp meter can store 25 data record in memory.
Once the button is pressed, the data number and
RECORD symbol will be shown on LCD. If the memory is
full, the FULL signal will be shown on LCD when the
record button is pressed.
•
Continue Data Record
The memory size is of 4000 records. To start recording
data, press the RECORD button until 2 “beep” sounds
heard and “RECORD” symbol will be shown on LCD. To
stop recording data, press the RECORD button again until
the RECORD symbol disappears.
•
Clear data logger
To clear the memory of the meter, turn the instrument off.
Press on the RECORD button and power on the
instrument. The LCD will show CLr.
(9). LCD display
4 digital LCD with indications for measurement values, unit
symbols, decimal point, polarity, over range, and low
battery ; etc.
(10). RS-232 PC Interface Jack
To connect the RS-232 interface to the PC and meter.
(11). COM Jack
Connect black test lead for voltage, frequency, resistance,
continuity and diode measurement as a negative terminal.
(12). " V
•
Hz " Jack
Connect red test lead for voltage, frequency, resistance,
continuity and diode measurement as a positive terminal.
