28
K
HOLD
Hz
1000A
OFF
V
3 4W
3 3W
KW
600V
CAT
MAX
(Figure-16)
Note : Continuity test is available to check open/short of the
circuit.
5-7 Diode Test & Continuity Measurement
Connect red test lead to the "
•
" terminal and black test
lead to the " COM" terminal.
Set range switch to the diode test position "
" .
Connect the red test lead to the anode side and black test
lead to the cathode side of the diode being tested.
Read forward voltage ( Vf ) value on LCD.
If the test leads is connected rather than procedure(4), the
digital reading should nearly equal to the reading in the
open circuit condition. This can be used for distinguishing
anode and cathode poles of a diode.
When the reading is below 0.050V, it will be indicated by a
continuous beeping.
5-8 Peak Detection Measurement
