6.5 Printer (Optional)
6.5.1 Connect the printer cable.
6.5.2 Connect the printer power.
holding time
drying time
Notice: We don't suggest the operator to adjust the parameter of
sterilization if it is not necessary.
6.4 S3 state
6.4.1 Adjust the holding time of sterilization and drying time.
Press PROGRAM button to select the program.(
)
Press TEMP button to select the temperature of program.
Then press START to adjust the drying time and holding time.
6.4.2 First to adjust the holding time.
Press TEMP button to adjust the data.
Press the PROGRAM button to select
the items.
6.4.3 Press START to save .
6.4.4 Drying time is 0-19.
Holding time of 121
is 1-59.
Holding time of 134
is 1-19.
℃
℃
1 3
1
2
t
1
t
3
t
5
t
8
t
9
t
2
t
4
t
6
t
7
t
s
P
t
6.7 Record of the cycle
Select to this interface by PROGRAM button.
It will show cycle No. .
Select the different cycle No. by press
TEMP button.
It will output the information to printer and
USB port after you press START button.
It can be stored the last 20 records.
The sample of content of print and files in memory as below:
1 4
CLASS B
Instructions manual
Instructions manual
Insert the USB stick to the slot
The information will output to USB stick after the cycle finish
The name of the file is according to the number of machine and
the cycle number
For example
.
.
.
:
The machine number is E00001
The cycle number is 00012
The file name in the USB stick is 0 0 1200 txt
The first two numbers represent machine number
The middle four numbers represent cycle number
The last two numbers represent error code
00 no error 01
error E01
.
.
1 0
.
.
.
.
.
:
;
:
6.6 USB Flash memory (Optional)
