T
ECHNICAL
R
EFERENCE
M
ANUAL
Distance Laser Sensor
Page 38/43
Responsibilities of the manufacturer of non-MRC accessories:
The manufacturers of non-MRC accessories for the MRL3 (H) are responsible for developing, implementing
and communicating safety concepts for their products. They are also responsible for the effectiveness of
these safety concepts in combination with the MRC equipment.
Responsibilities of the person in charge of the instrument:
WARNING:
The person responsible for the instrument must ensure that the equipment is used in accordance with the
instructions. This person is also accountable for the deployment of personnel and for their training and for
the safety of the equipment when in use.
The person in charge of the instrument has the following duties:
1) To understand the safety instructions of the product and the instructions
in the
Technical Reference Manual
.
2) To be familiar with local safety regulations relating to accident prevention.
3) To inform MRC immediately if the equipment becomes unsafe.
10.4 Hazards in use
Important hazards in use
WARNING:
The absence of instruction, or the inadequate imparting of instruction, can lead to incorrect or prohibited use,
and can give rise to accidents with far-reaching human, material and environmental consequences.
Precautions
:
All users must follow the safety instructions given by the manufacturer and the directions of the person
responsible for the instrument.
CAUTION:
Watch out for erroneous distance measurements if the instrument is defective or if it has been dropped or
has been misused or modified.
Precautions:
Carry out periodic test measurements, partially after the instrument has been subject to abnormal use, and
before, during and after important measurements. Make sure the MRL3 (H) optics are kept clean.
WARNING:
Hidden labels of the MRL3 (H) when installed could cause a dangerous situation.
