8
IV.
Operation Instructions
4.1 Working Conditions
1
The instrument should be installed on a stable work station, free of vibration. The instrument
shall be 10cm away from the wall in all directions, in order to ensure effective heat dissipation.
2
The instrument should be kept in dry environment, free from moisture and corrosive gas.
Make sure to operate the instrument under the environment of 20
℃
.
3
The instrument uses 220V/50Hz AC power supply (AC electronic voltage regulator shall be used
if the power supply is instable). Get the power plug into an outlet and ensure safe grounding.
4.2 Settings and Keys
Turn on the power, and the initial page is shown as below:
Figure 3
Press any key to enter the operation interface, see Figure 4:
