background image

Warning: to ensure your safety, before operation or maintenance, please be 
sure to read this manual carefully! 

Notice: 
1, Our air compressor is oil free design, please do not add any lubricating oil. 
2, To ensure the compressor working performance and long service life, it is better to 
drain it every 3 days, for up to 7 days, please be sure to drain it! 

Thank you for purchasing our Silent Oil Free Air Compressor, it can be used for all 
industries, which need clean and silent air supply, and please contact with your local 
distributor for the most suitable model for you.

 

Operational Safety: 

When using our Silent Oil Free Air Compressors, please take a note for all the following 
information: 
1,  Keep clean for the workplace. Cluttered areas invite injuries. 
2,  Do not run the compressor in damp condition. The compressor should never be used in an 
area where it could be exposed to water or excessively damp conditions. 
3,  Guard against electric shock. During operation, please do not let the compressor connect to 
other grounding items. 
4,  Do not let children or pets come into workplace, do not allow them touch the motor, 
highpressure hose, air tools, main cable or some other parts. 
5,  Keep the compressors well. After use, please don't forget drainage, and please release the 
pressure of tank, keep the compressor in a dry and ventilated place. 
6,  Do not use the compressor with force. Before operation, please do referto the rated voltage 
and frequency of the compressor, and do not use it overload .(Do not let the compressor work for 
more than 1hour continually, it is not good to keep long service life for the compressor) 
7,  Do not abuse the hose/cable.Never pull the compressor by the air hose or electrical 
cable. Keep hose/cableaway from heat and sharp edges. And do not touch the metal 
plug pins when connecting or removing the electrical plug. 
8,  The compressors only can be used to press air, can not be used for any other gas 
under any situation. 
9,  Disconnect the compressor from power supply after operation. Before carrying out any 
maintenance on the compressor, always switch off and unplug the compressor from the power 
supply. 
10, Do not use the compressor overpressure. The fixed max pressure is 8 Bar, and safety valve 
would release pressure at 8.5Bar. 
11, For maintenance, please use the original spare parts, or it may cause air compressor 
damage, even personal injury. 
12, Do not use the compressor where with flammable and explosive gas. 

Personal Safety 
Symbols used on the air compressor. 

 

 
 

 

 

 

Warning shock 
hazard 

OFF 

Do not lubricate 

Ground protect° 

ON

1

Read the  
operator manual 

Warning high 
temperature parts 

Summary of Contents for COMP-61






Reviews: