MR MESSKO MTRAB, Operating Instructions Manual, Page: 80 / 124

8 Operation
80 BA6820378-03 EN
CAUTION
Slipping hazard!
Danger to health!
► In case of temperatures at or below freezing, any escaping condensa-
tion can lead to icy ground beneath the device. In this case, do not step
under the device.
NOTICE
Malfunction due to contaminated silica gel
Prevent the silica gel becoming contaminated due to direct contact with the
insulating fluid.
In the event of the silica gel being contaminated with insulating fluid, refer to
the notes in the section Error messages and troubleshooting (Contaminated
silica gel [
► Section 9.5, Page 91]).
If a device error LED lights up or flashes, please observe the error table
in the chapter Error messages and troubleshooting [ ► Section 9, Page 83].
Figure 61: Signaling device errors
This also applies if an error is signaled over the "device error" relay.