background image

SAFETY AND OPERATING INFORMATION

Use the SteamStart

®

 control to turn the steam generator on.  

The SteamStart control will only light up when the steam  
generator is on.  
The steam generator will automatically shut off at 20 minutes,  
to turn the steam generator off manually prior to the automatic shut 
off, press the button on the SteamStart control.
The SteamStart control may blink if the steam generator is not 
functioning properly (see page 9).

 

Do not install or use any SteamStart  

control without reading and understanding the MrSteam steam 
generator Installation and Operation Manual (PN 100467 Rev 3.12 
or higher). Failure to read and understand these instructions may 
result in an inoperative or hazardous installation.
A peel-off warning label has been provided in the Information enve-
lope This label is to be applied to the wall of the installed shower or 
steam enclosure in a conspicuous location.

 

Flush a minimum of two-three hours after the con-

trol has been turned off to insure that the water has cooled.

 

Draining immediately after a steam cycle may 

expose user to scalding water and may expose PVC and other pip-
ing to high temperature water. Check local codes. The unit will refill 
automatically when the control is activated again.

mr

.

steam

®

                                            

  

Steam@Home

®

 

SteamStart

®

 Controls

_________________________________________________________________________

!

W A R N I N G

H

O

M

E

O

W

N

E

R

13

USING Mr.StEAM ESSENtIAL oILS

Enjoy AromaSteam essential oils by placing a drop or two into an 
unheated AromaSteam steamhead as shown in the illustration.  
Only use MrSteam AromaSteam essential oils in the MrSteam

® 

AromaSteam steamhead.

•฀Use฀essential฀oils฀with฀caution.฀Essential฀oils฀are฀for฀

 

external use only. Keep out of reach of children. Essential oils are 
highly concentrated and are potent substances and should not be 
applied directly to the skin as they can be irritants. Use essential 
oils with caution. 

•฀Place฀the฀drops฀into฀the฀MrSteam฀AromaSteam฀steamhead฀recess฀

prior to turning on the steambath. Do not place drops in a hot 
steam head as SERIOUS INJURY CAN RESULT IF YOU DO NOT 
FOLLOW THIS WARNING.

•฀Start฀with฀one฀drop฀to฀gauge฀strength฀and฀suitability.฀Limit฀to฀a฀

maximum of a few drops for a steam bathing session. 

•฀The฀bather฀should฀exit฀the฀steambath฀IMMEDIATELY฀if฀

 

dizziness occurs. If skin irritation occurs stop using the oils imme-
diately. Remove any excess oil by washing in mild soap and water. 
If ingested, rinse mouth with water. Administer water or milk to 
dilute. Contact a physician immediately.

AromaSteam steam head

(install per instructions on pg.7)

Steam emission slot

AromaSteam
10ml bottle with 
integrated dropper

Recess for 

essential oil 

 

Aromatic oils should be added to 

steamhead before turning on the steambath unit.  
DO NOT add oil during steam bathing or when  
the steam head is heated.

STEAM GENERATOR MAINTENANCE

Other than periodic draining, maintenance procedures 
are minimal. Every 2 months, or more often in “hard” 
water areas, the manual drain valve should be opened 
fully flushing out accumulated materials, salts and other 
particles which are natural by-products of boiling water. 

Do not alter or modify any MrSteam products includ-
ing the steam generator or SteamStart controls. 
Doing so may result in an inoperative or hazardous 
installation and will void the warranty.

IMPORTANT NOTE: 

Do not operate any SteamStart  

control with other than a Mr. Steam SAH steam genera-
tor. Doing so may result in an inoperative installation.
This document contains important safety, operation 
and maintenance information. Do not discard this 
document.
Malfunction due to power spikes, lightning, fire, 
freezing or flooding is not covered under the warran-
ty. Discontinue use of the steam generator or control 
if the steam generator is damaged or otherwise not 
functioning 

CArE tIPS For StEAM/StArt AND StEAMHEADS

1. Use only mild soap and water on a soft cloth to clean the control and steamhead.
2. Do not use abrasive cleansers

Tightly close bottles when storing oils.  
Keep bottles away from sources of ignition.

!

C A U T I O N

!

C A U T I O N

!

C A U T I O N

!

C A U T I O N S

!

W A R N I N G

Summary of Contents for Steam@Home 3000

















Reviews: