mr
.
steam
steambaths
®
tempo controls
23
Tempo
®
Operating Instructions
The Tempo Control features programmable digital temperature control,
a fixed (60) minute duration, ON/OFF and PAUSE.
ON/OFF - Diagram 1
Press the ON/OFF key to start or stop the flow of steam.
Steam will begin to flow a few minutes after the control is turned ON.
The duration required for the steamroom to reach steambathing tem-
peratures depends on the steamroom construction and steam generator
specifications. Steam may continue to flow for a short time after the
control is turned OFF.
PAUSE feature - Diagram 2
If a pause in steam flow is desired press the PAUSE key. The display will
flash while the control is in the PAUSE mode. The timer will continue
to countdown while in the PAUSE mode.
Setting the temperature - Diagram 3
The control is pre-set and will display the temperature setting of 110F
(default setting). Use the UP and DOWN keys to change the tempera-
ture setting from 105 F to 120 F in one degree increments.
Set the steambathing temperature according to personal preference,
however it is highly recommended to begin steambathing at a low tem-
perature setting to gauge comfort and safety levels.
Timer feature
When the control is turned ON a 60 minute time duration is initiated.
The control will turn off after 60 minutes unless the control is turned
off manually.
Memory feature
If the control is turned off manually before 60 minutes then the
default temperature of 110˚F will be used the next time the control is
turned on. If the control times out at 60 minutes (not manually turned
off) then the previous user temperature setting will be used when the
steambath is used again.
DIAGRAM 1
DIAGRAM 2
DIAGRAM 3