10
WARNING: READ CAREFULLY THIS INSTRUCTIONS BEFORE INSTALLING
AND COMMISSIONING THE PRODUCT. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
PRODUCT INSTALLATION
The product at issue must be installed,
commissioned and maintained only by licensed
and authorised people, respecting the laws
concerning the electrical installations. Not
conforming installations, wrong adjustments or
product alterations may cause fire, electric shock,
or personal injuries. The manufacturer is not
responsible for
any damage due to wrong
installation or improper use.
ELECTRICAL CONNECTIONS
All the connections must be rated for a single-
phase 110-230Vac power supply, with the
relative Earth
connection. For the disconnection from
the power line,
use an all-pole switch with
contacts having a
dimension of at least
3,5mm. Arrange
all the
necessary safety
devices
and use only materials
complying with
the standard of electrical installations.
The cable
must have a section properly rated according
to the
load connected.
Attention:
If any cable is
damaged, it must be immediately replaced by
a
qualified person in order to avoid any
hazard.
manufacturer reserves the right for
changing
technical data and features without prior
notice.
SAFETY INFORMATION
Do not operate in the high voltage area of the electronic
board, when it is supplied. Use the product only in
combination with devices which can guarantee a safe
extended time functioning. The radio signal reception of
the device could be disturbed by the presence of
electrical disturbances being transmitted by other
appliances working on the same frequency or if the
product is somehow shielded by metal parts.
PRODUCT DISPOSAL
At the end of this product’s useful life, it must not be
disposed of as domestic waste, but must be taken to a
collection centre for waste electrical and electronic
equipment. It is the user’s responsibility to dispose of this
appliance through the appropriate channels at the end of
its useful life. Failure to do so may incur the penalties
established by laws governing waste disposal.
Hereby automation s.r.l. declares that the product
complies with the essential requirements and other
relevant provisions, established by the Directive
1999/5/EC.
In the view of a constant
development of their products, the
manufacturer reserves the right for changing
technical data and features without prior notice.
