5
TIMER SETTING
1. Turn unit on and set desired operation and level setting.
2. Touch the TIMER key, display will show default [00:00] and Timer indicator will illuminate.
3. Turn the Control Knob counter-clockwise to set the number of hours (1-9). Turn the Control Knob
clockwise to set minutes (1-59). Max is 9 hours and 59 minutes.
4. After setting, touch TIMER key again to confirm or wait until the display stops flashing.
5. The display will alternate between set temperature/power and remaining time.
6. At the end of countdown, unit will stop operation, beep once and return to standby mode.
7. To cancel Timer, touch and hold the Timer key.
LOCK FUNCTION
1. Touch the LOCK key to lock the control panel, the Lock indicator will illuminate.
2. When locked, none of the keys will respond.
3. To cancel lock function, touch and hold the Lock key for 3 seconds.
Note: panel can be locked while in standby mode.
SELECTING THE PROPER COOKWARE
The base of the cookware must be of a ferrous metal (metal that can be magnetized): Cast iron,
enameled iron, steel and stainless steel.
Base of cookware should be between 4.75 to 10.25 inches; bottom should be flat.
A simple test to check if cookware will be compatible is to take a small magnet and place it to the
bottom of pan. If the magnet firmly sticks, the cookware is compatible.
These type of cookware will NOT work with inductions: Glass, copper, aluminum, ceramic, cookware
with a concaved bottom, bowl-shaped cookware or those with a diameter smaller than 4.75 inches.
CARE & MAINTENANCE
Unplug unit from power source. Wait for surface to cool down before cleaning.
Wipe ceramic plate and exterior surface with a soft damp cloth. If excessively dirty, soak cloth in a
mild detergent and water mixture.
Clean the air vent regularly with a small brush.
Never immerse the unit in liquid or wash under running water.
