Basecamp, Inc.| Portable Shower
Operating Instructions and OwnerÊs Manual
3
SPECIFICATIONS
UNPACKING and ASSEMBLING
1.
Remove heater from carton.
2.
Remove all protective material which may have been applied
to the heater for shipment.
3.
Check the appliance for possible shipping damage and
straighten out all hoses to remove any kinks or twists.
4.
Install handle assembly by screwing it into place.
5.
Attach the supplied regulator by rotating the t-wing nut in a
„clockwise‰ direction carefully not to over tighten.
6.
Attach the 1 LBS. LP cylinder to the regulator by rotating in a
„clockwise‰ direction. Only use LP cylinders with proper fuel
type approved for the appliance. Check for gas leaks with
soapy water.
DO NOT USE A FLAME TO CHECK FOR LEAKS.
CAUTION: Certified for use only with LP-gas cylinders of the U.S. Department of Transportation (DOT) or Transport Canada,
CAN/CSA B339.
Model:
XCW20
(F235350)
Rating: BTU
10,000 -18,000
Battery
5.0Ah Sealed
Lead Acid Internal
Battery
Run Time (Full Charge)
40 minutes
Fuel Source
Propane
Fuel Supply Pressure
(to regulator):
Max. Bottle
Pressure
Gas Supply Pressure
(Regulator out):
11‰ WC
Electrical Input
115V, 60 Hz, 1±, 2A
Min. Operating
Voltage:100V
230 Watts (W)
FUSE 3AL 250V
High Temperature Control:
125°(F)
Temperature Rise
42°(F)
Ignition
Electronic Spark
DIMENSIONS
Model:
Length(in)
Width(in)
Height(in)
Weight(LBS)
XCW20
19 1/2‰
(w/Handle Attached)
10 1/2‰
13‰
22 lbs.
Handle Assembly
Pump Quick Connect Inlet Connection
Regulator
Assembly
