Mr. Flame Glass Screen, Owner'S Manual

Page: 6 / 6

6
I NSTALLATION INSTRUCTIONS
1. Before installing enclosure, be sure fire is out and fireplace is cool and clean. Read
"Ash Disposal" (page 2) ALWAYS lift enclosure by sides, NEVER top bar. Remove
enclosure from box and lean upright against the wall. Remove and save hardware kit
from the box. Remove packing material and any shipping support from under doors.
2. INSTALLING ENCLOSURE
– FIG A., FIG B.
and Picture C

Remove parts from hardware kit.
 FIG A. - Put hex screws through slot in flex
bracket. Attach flex bracket to back of enclosure,
screwing bracket into proper hole. DO NOT
TIGHTEN.
 Screw thumb screws into lintel clamps.

Put machine screws through slot in flex bracket
and screw into lintel clamps. DO NOT TIGHTEN.
 Push enclosure firmly against fireplace so it
overlaps evenly on both sides.
 FIG B. - Attach lintel clamps to fireplace lintel bar
and tighten thumbscrews.

Tighten hex screws and machine screws. Be
sure enclosure is firmly attached to fireplace and
fiberglass is in place.
3. Picture C
– Install Top and Bottom Damper
Knobs and Door Handles as seen in
Picture C.
Picture C