PAGE 26 — DCA-180SSV— OPERATION AND PARTS MANUAL — REV. #1 (04/14/10)
Figure 12. Connecting Loads
Connecting Loads
Loads can be connected to the generator by the
Ouput
Terminal Lugs
or the convienience receptacles (Figure 12).
Make sure to read the operation manual before attempting
to connect a load to the generator.
To protect the output terminals from overload, a
3-pole, 1000A
main
circuit breaker is provided. Make sure
to switch
ALL
circuit breakers to the
OFF
position prior to
starting the engine.
DCA-180SSV— OUTPUT TERMINAL PANEL FAMILIARIZATION
Over Current Relay
An
over current relay
(Figure 13) is connected to the main
circuit breaker. In the event of an overload, both the circuit
breaker and the over current relay may trip. If the circuit
breaker can not be reset, the
reset button
on the over cur-
rent relay must be pressed. The over current relay is lo-
cated in the control box.
Figure 13. Over Current Relay
Summary of Contents for WHISPERWATT DCA-180SSV
Page 2: ...PAGE 2 DCA 180SSV OPERATION AND PARTS MANUAL REV 1 04 14 10 Diesel engine exhaust and some of ...
Page 3: ...DCA 180SSV OPERATION AND PARTS MANUAL REV 1 04 14 10 PAGE 3 1 ...
Page 20: ...PAGE 20 DCA 180SSV OPERATION AND PARTS MANUAL REV 1 04 14 10 NOTE PAGE ...
Page 83: ...DCA 180SSV OPERATION AND PARTS MANUAL REV 1 04 14 10 PAGE 83 1 NOTE PAGE ...
