20
Connecting to the PC by USB Cable
Connect the USB cable to the USB port in the
rear of the PC.
Connect the other end of the USB cable to the
connection jack located on the bottom right of the
MP-F777.
●
While executing a program, disconnecting the
USB cable can cause a malfunction of the PC.
Insert batteries into the MP-F777 and turn the
POWER on.
There should be a message that says the PC is looking
for a new device. The USB driver will be installed.
The installation will not be displayed. Make sure that the
USB driver has been properly installed by checking under
“Device Manager”.
mp-f777 ENG 4/29/03 1:00 PM Page 20
