MPM MUG-13, User Manual, Page: 10 / 24

10
GB
APPLIANCE OVERVIEW
1.
Thermostat knob
2a.
Illuminated low power heat switch (I)
(MUG-13: 800 W, MUG-14: 1000 W)
2b.
Illuminated medium power heat
switch (II) (MUG-13: 1200 W, MUG-14:
1300 W)
(2a + 2b – high power heating (I + II) –
MUG-13: 2000 W, MUG-14: 2300 W)
(2a + 2b + 3 - highest power heating -
MUG-13: 2400 W, MUG-14: 2700 W)
3.
Illuminated fan heater ON/OFF switch
4.
Fan heater (400 W)
5.
Power cable store
6.
Radiator castors
7.
Radiator ribs (9 in MUG-13
and 11 in MUG-14)
8.
Handle
9.
Fan heater air outlet
BEFORE FIRST USE
1.
Remove the radiator from the box and discard any bags, stickers and polystyrene fillers.
2.
Check the device for any damage during transport and contact the seller when in doubt.
3.
Ensure that your mains network matches the nameplate ratings of the appliance.
4.
Install the radiator castors following the instructions below.
INSTALLING THE CASTORS
1.
Carefully position the appliance upside down (preferably on a soft surface, e.g. a carpet or
floor lining), taking care to avoid any damage to the protective coating on the radiator (Fig. 1).
2.
Remove the metal castor supports and metal wire clamps.
3.
Insert the castor bolts into the support holes and secure them with nuts (Fig 2).
4.
Use the metal wire clamps to fit the metal supports between the rib recesses (Fig 3, 4 and 5).
5.
Put the appliance back to the normal position.
Fig. 1 Fig. 2 Fig. 3 Fig. 4 Fig. 5