MPM MPM-25-KMI-01, Manual

Page: 27 / 64

27
EN
MICROWAVE OVEN INSTALLATION REMARKS
1.
Unpack the device. If the microwave oven is covered in plastic film, remove it before opera-
tion. Carefully inspect the device for any signs of damage. If the device is damaged, promptly
report it to the seller or deliver the device to the manufacturer’s service centre.
2.
Store the microwave oven in a dry, non-corrosive place, away from heat and moisture that
may be generated by gas burners or water tanks.
3.
Place the microwave oven away from TV and radio receivers or antennas, which may gener-
ate interferences. The distance from such devices should be over 5 m.
4.
Install the microwave oven near an accessible, earthed power socket.
INSTALLATION OF A BUILT-IN MICROWAVE OVEN
NOTE! Due to limited space inside the cabinet, the microwave oven must be installed as described below, in
order to avoid any risks. The distances indicated in the drawings must be maintained in order to ensure that
the appliance operates correctly through its proper ventilation and cooling in the cabinet. Furniture walls
in which the appliance is installed should be heat-resistant, particularly if the furniture walls are made of
coated chipboard. The coating should be able to withstand the temperature of up to 120°C . Adhesive coatings
or plastic coatings which are not resistant to this temperature may be subject to deformation and damage. The
support for the microwave oven should be able to withstand its weight. For safety reasons, avoid direct contact
between the appliance and electrical parts after the installation is completed.
Drill openings for installation supports
in locations shown in Fig. 1. Strictly
observe the specified dimensions.