MPM MMW-04, Manual, Page: 15 / 36

15
GB
4.
Move the hair trimmer up and down gently while twisting it to the left and right. This will
help remove unwanted hair effectively.
CAUTION! The trimmer head cuts the hair (instead of pulling it). This does not leave the delicate skin in the nose
and the hears sore. Do not use the nose & ear trimmer head on other body parts.
5.
Do not push the nose & ear trimmer head too deep into the nostril or the ear (5 mm deep is
enough).
6.
When done, turn off the hair trimmer by sliding the Power switch (2) away from the head.
USING THE HAIR TRIMMER: JAW SHAVING HEAD
1.
Install the jaw shaving head (7).
2.
Start the hair trimmer by sliding the Power switch (2) toward the head.
3.
Bring the hair trimmer close enough to the face for the jaw shaving head to touch the facial
hair.
4.
Work in gentle and short passes for a better shaving effect. Use your other hand to keep the
facial skin taut; this helps keep the short hair away from the skin and make shaving easier.
CAUTION! The jaw shaving head is for modelling the stubble and shaving small patches on the face.
5.
When done, turn off the hair trimmer by sliding the Power switch (2) away from the head.
USING THE HAIR TRIMMER: BODY HAIR TRIMMER HEAD
CAUTION! Oil the blade of the head (8) before the first use (see CLEANING AND MAINTENANCE).
1.
Install the body hair trimmer head (8). It is suitable for trimming the beard too.
2.
Install the trimming control attachment (9) at the suitable trimming length on the body hair
trimmer head (8). The trimming control attachment can be installed in one of the grooves to
choose one of the trimming lengths: 5, 10 or 15 mm (Fig. 5).
5 mm
10 mm
15 mm
Fig. 5
3.
Start the hair trimmer by sliding the Power switch (2) toward the head.
4.
Bring the concave side of the trimming control attachment close to the body and work in
passes by moving the attachment over the hair and in the direction of their growth. Work in
slow and careful passes.