MPM MMW-04, Manual, Page: 13 / 36

13
GB
CHARGING THE TRIMMER BATTERY
 Before using this hair trimmer for the first time, charge it for at least 5 hours.

Before charging for the first time, make sure that the hair trimmer is powered off.
 Connect the power adapter cable to the power adapter input (4).

Connect the power adapter (13) to a mains outlet.
 The CHARGE indicator light (3) is on which means that the power adapter is connected to the
mains and the hair trimmer is charged.
 Do not charge the battery for more than 6 hours.

The hair trimmer has a NiMH battery without the ‘memory effect’; this means it can be charged
while the hair trimmer is powered on.

The hair trimmer can work cordlessly for 45 minutes when fully charged.
 When the hair trimmer starts running noticeably more slowly, connect the power adapter to
recharge the battery.
 Standard battery charging should not be longer than 4 hours - disconnect the charger after
4 hours of charging.
OPTIMISING THE BATTERY LIFE:

Follow this procedure two times a year. Discharge the battery completely by starting the hair
trimmer and leaving it to stop completely on its own.

Do not leave the power adapter connected to a mains outlet if you are not charging the hair
trimmer.

If you did not use the hair trimmer for a long time, recharge it for at least 6 hours before use.
CAUTION! Do not start the device while charging the battery.
INSTALLING AND REMOVING TRIMMER HEADS
1.
Align the base of the head (5), (6), (7) or (8) to the receptacle on the hair trimmer body (Fig. 1).
Engage the head pin in the respective socket in the hair trimmer body and press down the
head to the body to secure it (Fig. 2).
Fig. 1 Fig. 2