MPM MMW-04, Manual, Page: 14 / 36

14
GB
2.
The head is removed by pushing it away from the body at approximately 45° (Fig. 3).
CAUTION! Install / detach each head with the hair trimmer
powered off.
USING THE HAIR TRIMMER: TRIMMING HEAD HAIR
CAUTION! Oil the blade of the head (5) before the first use (see
CLEANING AND MAINTENANCE).
1.
The hair must be completely dry before trimming. Comb your hair in the direction of their
growth.
2.
Attach the head hair head (5).
3.
Choose one of the three trimming combs and attach it to the
installed head (Fig. 4). There are three trimming combs (10), (11),
and (12) to choose from with the following trimming length
options, respectively: 3, 6 and 10 mm. Release the tab at the end
of the trimming comb to detach it from the head.
4.
Start the hair trimmer by sliding the Power switch (2) toward the
head.
CAUTION! Always work by moving the hair trimmer in the direction opposite
to that of the hair growth; otherwise the trimming performance will be poor.
Work in slow, steady passes.
5.
Move the hair trimmer over the top of the head in each pass to
trim all hair to an equal length.
6.
Keep the flat bottom of the trimming comb sliding along the scalp to trim the hair to an equal
length.
7.
For the best trimming effect with curly, sparse or long and thin hair, use the comb (14)
included with the product to bring the hair toward the hair trimmer blade.
8.
Frequently remove clippings from the trimming comb and the hair comb.
9.
Precise trimming and shaving above the neck and around the ears do not require a trimming
comb. Mind these guidelines, however:
- Without a trimming comb, the hair trimmer will shave away all hair it engages, leaving
the skin bald.
- Comb down the hair tips over the ears before trimming the hairline around them.
- Work with the hair trimmer at an angle at which only one edge of the blade touches the hair.
- Carefully trim off the hair at the ends and keep the hairline near the ears.
- Hold the hair trimmer bottom side up and work in downward passes to trim the hairline
on the back of the neck and the sideburns.
10.
When done, turn off the hair trimmer by sliding the Power switch (2) away from the head.
USING THE HAIR TRIMMER: NOSE & EAR TRIMMER HEAD
1.
Install the nose & ear trimmer head (6).
2.
Start the hair trimmer by sliding the Power switch (2) toward the head.
3.
Carefully place the tip of the trimmer head in the nostril or in the ear.
Fig. 3
Fig. 4