MPM MMU-03, User Manual

Page: 8 / 24


Always switch off the appliance before unplugging it.
 In order to ensure your children‘s safety, please keep all packaging (plastic bags,
boxes, polystyrene etc.) out of their reach.

WARNING! Do not allow small children to play with the foil as there
is a danger of suffocation!
DESCRIPTION OF THE APPLIANCE
1.
Container for trimming
residues - chamber.
2.
Blades cover - trim-
ming head
3.
Lid of the chamber for
trimming residues
4.
Trimming blades
5.
Head protective cover
6.
Charger outlet
7.
On/Off switch
8.
Indicator lamp
9.
Brush
10.
Body of the appliance
11.
Power cord
z The trimmer is designed
for cutting hair and knots
on clothing. Smoothes the fabric and removes lint.
z Suitable for all kinds of fabric.
z The clothes must be spread evenly on a flat horizontal surface.
z Do not press down the trimmer on the clothes when removing the knots - slide it gently over
the fabric!
CHARGING
z
Before the first use of the appliance, you should charge it for at least 8 hours.
z Before charging the appliance for the first time, make sure it is switched off.
z
Connect the charger cable to the power socket (6).
z Next place the power cord plug (11) in the power outlet.
z
The power supply indicator lamp (8) lights up indicating that the appliance is being charged.
NOTE! The appliance is designed to operate and to be charged at 230 V.
z The operation time of a fully charged appliance is 0,5 hour. The charging time is 8 hours. The
charging time shall not exceed 20 hours.
z The appliance is rechargeable - has a built-in charger. The appliance is ready for trimming
immediately after connecting to the power source.
z When the appliance starts to run slower, connect the power cord to recharge the battery.
z
After the appliance is connected to the network, the red indicator lamp lights up (8) indicating
that the appliance is ready to use.
1 2 4 5 3
6
9
11
7
10
8
8
GB