MPM MMS-04, User Manual

Page: 9 / 20

9
GB
1.
Check if the appliance is unplugged from the power outlet.
2.
Unfold the massager housing (fig.1)
WARNING! Do not use a massager with a folded housing.
3.
Fill the container with water of a suitable temper-
ature (not less than 3.3 l and not more than 6.5 l).
4.
Plug the appliance to the power outlet.
5.
Place the appliance on a floor in such a way that you
could sit down comfortably and easily put your feet
inside.
6.
Turn on the massager with the switch (1). Temperature maintenance, bubbles massage and
infra-red radiation provide excellent relaxing effect and stimulate blood circulation in the
body, particularly in long win ter evenings. Heat radiating from the appliance is not meant for
heating up the water. It is used to prevent the water from cooling down too fast.
7.
After finishing the massage, switch off the device, disconnect from the mains and pour out
water.
MASSAGE TIME:
To improve psychophysical condition it is enough to have an everyday massage of
about 10 minutes.
You can also increase this time and the frequency of massage. The massager will give you a
pleasant experience, improving blood supply and cell regeneration, activating and revitaliz-
ing feet, as well as reducing muscle tension.
ATTENTION! No operation should last longer than 20 minutes! After this time turn off the massager and allow
it to cool down completely. Then the appliance can be used again.
CLEANING AND MAINTENANCE:
1.
Before cleaning the appliance, unplug it from the power outlet.
2.
After the massage pour the water out of the massager.
ATTENTION! Do not pour water on the switch.
3.
Next, rinse the container with water and some soft detergent, especially after using bath salts.
Do not use strong cleaning agents which may damage the massager body.
ATTENTION! Do not use wire brush or any similar tools. Do not use sharp or abrasive cleaning agents.
4.
After rinsing dry the container with a soft cloth.
5.
Store the massager in the stowed position.
f ig.1