MPM MBL-26, User Manual

Page: 18 / 40

18
GB
CAUTION! Fill the blender jug up to the 1,500 ml mark only.
4.
Place the blender jug in the blender housing.
5.
Plug in the high-speed vacuum blender to the mains.
6.
Select the automatic processing program you need. Do this by pressing the MENU button
repeatedly. Start the selected program by pressing the START/STOP button. The selected au-
tomatic processing program is indicated with its icon on (4a). When the automatic process-
ing program is done, the high-speed vacuum blender will beep 10 times. You can always
interrupt the activated program by pressing the START/STOP button again.
7.
You can also adjust the blending speed and time and/or turn the vacuum on or off as you
need. Set the desired blending speed and time with the SPEED and TIME buttons, and start
processing with these settings by pressing START/STOP. If you want to vacuum blend, first
evacuate the air by pressing the VACUUM button.
CAUTION! Do not run the high-speed vacuum blender for more than 3 minutes. When done processing, wait
approx. 30 minutes for the high-speed vacuum blender to cool down before processing more products.
CAUTION! Do not start the high-speed vacuum blender if the blender jug is empty.
8.
When done processing, unplug the high-speed vacuum blender from the mains, open the
swivel blender top and remove the blender jug. If you were processing with vacuum (or an
automatic processing program used vacuum), grasp and gently pull on the boss of the rub-
ber valve
⓭
on the swivel blender top
❷
before opening it. This will depressurize the swivel
blender top. Otherwise it will be very difficult to open the swivel blender top
❷
.
9.
Open the blender jug lid
⓬
and move the blended contents as required. If you were process-
ing with vacuum (or an automatic processing program used vacuum), grasp and gently pull
on the boss of the rubber valve ⓭ on the blender jug lid
⓬
before opening it. This will depres-
surize the blender jug. Otherwise it will be very difficult to open the blender jug.
CAUTION! Wait for the blade rotor to stop before pouring out the jug contents!
10.
The portable pitcher
⓮
can be brought to vacuum. When the portable pitcher is in the
blender housing, all blending features are locked out. Evacuate air from the portable pitcher
⓮
with the VACUUM feature. Now you can take the portable pitcher with the contents with
you. Remember to pull on the boss of the rubber valve
⓭
first, if you want to open the lid of
the portable pitcher.
CAUTION! Fill the portable pitcher up to the 800 ml mark only.
11.
When done processing, clean the high-speed vacuum blender as explained in Section
“CLEANING AND MAINTENANCE”.
PRACTICAL HINTS & TIPS
1.
If at vacuum, remember to depressurize the blender jug / portable pitcher before re-
moving the lid. Depressurize by gently pulling on the boss of the rubber valve ⓭. De-
pressurize the swivel blender top ❷ in the same way before you open it.
2.
When blending products for babies or young children, always make sure that all ingre-
dients have been blended thoroughly before serving.
3.
If the speed is noticeably reduced during blending, you need to break up the products
into smaller chunks before blending.