MPM MBL-26, User Manual, Page: 16 / 40

16
GB
on the jug lid attached to the blender jug must point toward the jug handle and the jug
spout, respectively (Fig. 6).
6.
Grasp the blender housing with one hand. Lift the swivel blender top ❷ with the other
hand into the position shown in Fig. 7.
7.
Put the blender jug ❼ in the blender housing ❶ with the jug handle aligned with the
open padlock mark. Now, twist the blender jug gently to align the jug handle with the
closed padlock mark (Fig. 8). With the blender jug installed, lower and press the swivel
blender top to lock it in place (Fig. 9).
8.
The blender jug is removed from the blender hous-
ing in the reverse order of assembly: lift the swivel
blender top ❷, twist the blender jug to align the jug
handle with the open padlock mark, and remove the
blender jug from the blender housing (Fig. 10). Re-
move the blender jug lid and the blade rotor.
INSTALLING THE PORTABLE PITCHER
1.
Install the rubber valve ⓭ in the portable pitcher lid
top ⓰. The rubber valve stem end must pass clear
all around through the underside of the lid. Place
the portable pitcher lid gasket ⓯ underneath the portable pitcher lid. Align the gasket
notches with the respective bosses under the portable pitcher lid.
2.
Twist on the valve filter ❿ snugly to the bottom of the portable pitcher lid ⓰.
3.
Close the portable pitcher ⓮ with the lid ⓰.
4.
Open the swivel blender top ❷, place the portable pitcher ⓰ in the blender housing
and close the swivel blender top ❷. You can only vacuum the portable pitcher. You
cannot blend the contents. The blender motor functions are locked out; if you attempt
to operate any blending-related control, Error E1 will be displayed.
Fig. 7 Fig. 8 Fig. 9
Fig. 10