MPL MS-MCDISK-D Series User Manual Download Page 16

Printed in Switzerland

Our local distributor:

1294

1 6

High-Tech  Made in Switzerland

MS-MCDISK-D Rev. B

COPYRIGHT AND REVISION HISTORY

Copyright © 1994 by MPL AG Elektronikunternehmen. All
Rights Reserved. Reproduction of this document in part or
whole, by any means is prohibited, without written permission
from MPL AG Elektronikunternehmen.

This manual reflects the revision B of the MCDISK-D and
firmware revision 3.3.

Publication Date :   August 1995

DISCLAIMER

All implied warranties on the product and manuals, including
implied warranties of merchantability and fitness for a particu-
lar purpose, are limited in duration to twelve (12) months from
the date of the original retail purchase of this product.

MPL has fully tested the MCDISK and reviewed the documen-
tation. However, MPL makes no warranty or representation,
either expressed, or implied, with respect to this product, its
quality, performance, merchantability, or fitness for a particu-
lar purpose.

In no event will MPL be liable for direct, indirect, special,
incidental, or consequential damages resulting from any de-
fect in the product or its documentation, even if advised of the
possibility of such damages. In particular MPL shall have no
liability for any programs or data stored in or used with this
product, including the costs of recovering such programs or
data.

MPL AG reserves the right to make changes to any product
herein to improve reliability, function or design.

AUTHOR'S NOTE

Dear user of this product. It is my expressed wish that this
product is not to be used to apply any kind of violence to
anyone. Because there is no absolute criterium for violence,
I trust your subjective interpretation – if it’s honest for you, it’s
OK for me.

Disregarding my wish will not break the license agreement or
any other contracts. However, ignoring it would mean not
respecting the thoughts I had when putting my efforts into this
product.

L. Zeller, MPL AG

MCDISK is a trademark of MPL AG Elektronikunternehmen.

Summary of Contents for MS-MCDISK-D Series

















Reviews: