86
Storing Default Settings
When HD400 has been formatted using the Windows FORMAT Command (FAT32), the default
settings must be restored using MPIO Utility’s Setup Config function.
1
Turn the power of HD400 ON and connect it to a computer using a 24PIN USB Multi-Cable.
2
Double-click
MPIO Utility
icon in your desktop.
3
Click the
Setup Config
button.
4
Click the
OK
button.
5
Click the
OK
button after the Safely Remove
Hardware message appears as shown.
6
After clicking the
OK
button,
Setup Config
(Default Setting Restoration) is complete.
You can unplug the device from the PC.
Note
MPIO Utility does not support Macintosh. Therefore, MPIO Utility cannot be used in Macintosh.
Only supports FAT32.
Click
Click
Click
Click
