MPH Sure Shot, User Manual

Page: 20 / 45

20
The menus are broken down into primary groups:

SPEED MENU – All things speed and distance related

DIRECTION SELECT – Directional measuring mode selection

FOLLOWING TOO CLOSE MENU – Following Too Close functionality

STOPWATCH MENU – Stopwatch functionality

HUD MENU – All things HUD related

AUDIO MENU – All things audio related

SYSTEM MENU – General system settings

LOGGING MENU – Log files containing self ‐ tests, shots, and Following Too Close calculations
7.1.2.2 Speed Menu
The SPEED MENU (Figure 12) is where you can adjust the various speed ‐ related shot settings.
Figure 12 ‐ Speed Menu Screens
7.1.2.2.1 Capture Mode
The CAPTURE MODE pop ‐ up menu is used to configure how often the laser will fire to obtain targets.

Single Shot – If the laser is in Speed & Range mode, the laser will fire once and calculate a single
speed and/or distance. No further speeds or ranges will be calculated until the trigger has been
released and pulled again. If the laser is in Range Only mode it will continuously fire.

Continuous – The laser will continuously fire, calculate and update new speeds and/or distances
as long as the trigger is depressed.
7.1.2.2.2 Operating Mode
The OPERATING MODE pop ‐ up menu is used to configure what type of measurements are needed.

Speed & Range – The laser will calculate and display both speed and/or distance for a given
target. This mode will calculate distances of around 30 feet or higher.

Range Only – The laser will calculate and display only the target distance. This mode has
additional ranging down to approximately 10 feet.