©IMPEX INC.
ʳ
ˉʳ
ʳ
IMPORTANT ASSEMBLY INFORMATION
ToolsrRequired for assembling the equipment: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended that this equipment is assembled by two or more
people to avoid possible injury.
ʳ
Ensure
Carriage Bolts
are inserted through the
SQUARE holes
on components that need to
be assembled. Attach washer only to end of the Carriage Bolt.
Use
Allen Bolts or Hex Bolts
inserted through the
ROUND hole
on components that need to
be assembled.
Always wait until all bolts are assembled onto the equipment before tightening the bolts. Do
not fasten each bolt right after it is installed
ʳ
ʳ
Fasten Nuts and Bolts
Securely tighten all Nuts and Bolts after all
components have been assembled in current and
previous steps.
NOTE: Do not over tighten any component with
pivotal function.
Make sure all pivotal components are able to move
freely.
Do not tighten all Nuts and Bolts in this step.
Seat Support (Part# 17) Assembly
ʳ
The pivot on Seat Support needs to face
upward
when assembling the Seat Support.
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
ʳ
