5
Safety Guidelines
Safety Instructions for Charging
Do not use an unofficial charging cable for external DC power to prevent the gimbal
from working properly and causing unnecessary damage.
•
Do not put the equipment into the water or get it wet!
•
Do not charge the equipment under fire or extremely hot conditions! Do not use or
store the equipment near heat sources such as fire or heaters! If the battery leaks or
gives off an odor, remove the equipment from the open fire immediately!
•
Do not use the unqualified adapter to charge the equipment!
•
Do not disassemble and install the equipment to prevent the gimbal from working
properly!
•
Do not use the equipment extremely harsh environments to prevent the gimbal
from working properly!
•
Do not pierce the equipment with nails or other sharp objects. Do
•
not hammer or pedal the equipment!
•
Do not hit, throw or shake the equipment!
•
Do not solder the equipment terminal directly!
•
Do not disassemble the equipment in any way!
•
Do not put the equipment into microwave or pressure vessel!
•
Do not use if the battery emits odor, heat, deformation, discoloration, or any other
abnormality; If the equipment is in use or charging, unplug the power adapter from
the device and stop using it immediately!
Battery Charging
The Slypod E is equipped with a Type-C interface, supporting 5V2A low-speed charging.
The fast charge protocol is not supported. Users can select the matched charger
according to actual needs. Please use the TYPE-C interface to charge the battery and do
not use external power sources such as wall outlet or car cigarette lighter to charge the
battery.