13
Step Time-Lapse
Select Step mode to set Travel Distance, Frame Number, Cycle Setting, Exposure Time,
Interval Time and FPS. Click “+”“
-
” to adjust the
parameter, click to start, the Slypod E will
run according to the set parameters, the interface will display Shooting Time Taken,
Total Shooting Time, Total number of photos. Enter the Step time-lapse interface, click
on the red circular area, the Slypod E can control the camera to take pictures. (Slypod E
needs to be connected to the camera with the camera control cable)
Set path
running time
Click on the red circular area, the
Slypod can control the camera to
take pictures
Click Start, the Slypod
E will run according to
the setting
Click on the red circular
area, the Slypod E can
control the camera to
take pictures