2
3
*
Do not throw it into a fire and do not expose it to high temperatures! Never dismantle the product.
*
Do not use another power supply cable, other than the one provided with your racing wheel.
*
Do not use the power supply cable if the cable or its connectors are damaged, split or broke, or if
you notice changes over time due to mishandling;
*
Make sure that the power supply cable is well inserted into the power socket, and properly
connected to the connector at the rear of the racing wheel’s base.
*
Do not dismantle the racing wheel: you can’t repair the device yourself. Any repair must be carried
out by the manufacturer, its authorized representative or a qualified technician.
*
Keep the product in a perfect dry location and do not expose it to dust or direct sunlight.
*
Do not pull or twist on the connectors and cables!
*
Do not pour any liquid on the product or its connectors!
*
Do not short-circuit the product!
*
Only use gear systems/attachment systems/accessories specified by the manufacturer.
*
If the racing wheel is operating abnormally (if it is emitting any abnormal sounds, heat or odors),
stop using it immediately, unplug the power supply cable from the electrical outlet and disconnect
the other cables.
*
Please unplug the power supply cable from the electrical outlet if you will not be using the racing
wheel for an extended period of time.
*
The electrical power socket must be located near the equipment and must be easily accessible.
*
Do not place the base in any tight spaces.
*
Do not cover the base.
*
Install the wheel’s base at at least 10-15 cm away from any wall surfaces.
Check in advance, and do not let any dust build up on the air vents.
Warning – Electrical shock - DANGER !
Air vents :
Make sure not to obstruct any air vents on the racing wheel’s base.
For a good ventilation, make sure to do the following things:
Warning – Injuries due to Force Feedback
and repeated movements
Playing with a Force Feedback racing wheel may cause pain in your muscles or joints.
To avoid any health problems:
*
Avoid lengthy gaming periods.
*
Take 15 minute breaks, after each hour of play.
*
If you feel any fatigue or pain in your eyes, head, hands, wrists, arms, feet, or legs, stop playing and
rest for a few hours before you start playing again.
*
If the symptoms or pain indicated persist when you start playing again, stop playing and consult
your doctor.
*
Keep out of children’s reach.
*
During gameplay, always leave both hands correctly positioned on the wheel without completely
letting go.
*
During gameplay, never place your hands or your fingers under the pedals or anywhere near the
pedal set.
*
During calibration and gameplay, never place your hand or your arm through the openings in the
racing wheel.
*
Make sure that the racing wheel’s base is properly secured, as per this manual’s instructions.
Product to be handled only by
users 16 years of age or older
HEAVY PRODUCT !
Be careful not to harm yourself
or anyone else !
The Moza Wheel base is very powerful !
if you lose control of your car and let go of the wheel
during the race of a game, take hold of the wheel again by
the grips only and not by the faceplate or shifter paddles, in
order to avoid the risk of accidental injury.
Never connect or disconnect the power supply to the back of the base if it is
already powered by the 220V mains socket
Always disconnect the power supply from the 220V socket if it is not in use!
If you wish to disconnect the power supply from the base:
1. unplug the power supply from the 220V power socket
2. Wait for the power LED to go OFF
3. You may remove the connector from the base
Summary of Contents for R16
Page 1: ...MOZA R16 R21 Manual EN ...