moyes LITESPEED, Owner'S Manual

Page: 23 / 50

LITESPEED OWNERS MANUAL
Version 1.01
21
11.
Disassemble control frame. Fold base tube out and lay the entire control frame
assembly back onto the keel. Open the ties and re-secure them ov er the control
frame, enclosing the frame inside Mylar. Fit padding to the bottom of control frame.
Tuck w ires and bars neatly inside the sail. Pull the hang loop from in front of the
uprights so as not to jam the hang loop betw een the keel and the sail.
Picture 23
Fit Base Bar Padding.
12. Place battens betw een leading edges w ith the camber to the tail end, then firm up
all ties and smooth out the rolled sail before closing the zip.
Picture 24
Pack Battens
between leading edges.
Special care must be taken w ith cables. The Litespeed features 1x 19 cable for
increased strength and low drag, but this cable is v ery easily kinked unless
special care is taken.
IMPORTANT
!