moyes LITESPEED, Owner'S Manual

Page: 14 / 50

LITESPEED OWNERS MANUAL
Version 1.01
12
After initial assembly it is suggested that the nose batten be left in but pulled
out slightly and left beside the nose plate for pack-up. Check that the nose
batten sits ov er the lug on the keel securely.
NOTE
!
4.
Insert the ring of the low er front w ires in the Bailey Block making sure that the spring
is firmly locked and the w ires untw isted.
Picture 8
Attaching the front wires to the Baileys Block.
5. Insert the nose batten. The batten may need some “feeding” through the Sail by
pulling the sail forw ard to remove any wrinkles as the batten slides into its pocket.
Picture 9
Insert nose batten.
6. Carefully spread each w ing making sure that y ou do not raise them above the keel.
Picture 10
Spread the wings.
Check bottom w ires are not tw isted or kinked.
NOTE
!