moyes LITESPEED, Owner'S Manual

Page: 13 / 50

LITESPEED OWNERS MANUAL
Version 1.01
11
ASSEMBLY PROCEDURES
1. Place the glider on the ground, zipper up. Open the bag, undo ties, remove A-frame
bottom padding and battens.
2.
Assembly the A-Frame.
Picture 6
Standard uprights and
base bar assembly.
Roll the glider over so that
it is standing on the
control frame.
3. Roll the glider over so that it is standing on the control frame.
Picture 7
Roll the glider onto the
A-frame and attach the
front wire to the Bailey Block.
Take special care with the w ires, the Litespeed features 1x 19 cable w hich can
easily be kinked unless special care is taken.
NOTE
!
With standard uprights, the uprights will naturally toe-in as show n in
Picture 6. Hold the base bar and the upright, tw isting the upright so the
connection lines up.
NOTE
!