manualshive.com logo in svg

Moyer Diebel MD2000-VHR, Installation, Operation & Parts Manual

Share
Download
Moyer Diebel MD2000-VHR Installation, Operation & Parts Manual Download Page 8

Installation Codes and Safety Symbols

CAUTION:   

Damage or problems associated with improper installation will not be covered by 
the limited warranty.

Installation Codes 

The installation of the dishwasher must comply with all local electrical, plumbing, health 

and safety codes or in the absence of local codes, installed in accordance with the 

applicable requirements in the National Electrical Code, NFPA 70, Canadian Electrical 

Code (CEC), Part 1, CSA C22.1; and the Standard for Ventilation Control and Fire 

Protection of Commercial Cooking Operations, NFPA 96.

•  High temperatue hot water sanitizing heat recovery dishwasher with 

built-in 70°F/82°C rise booster heater.

•  208-240VAC 1 or 3 phase
•  Field convertible single to three phase
•  Self-draining pump
•  Automatic Start
•  Fresh water rinse
•  55 racks per hour/60 second total cycle time
•  Rinse sentry
•  Automatic drain valve
•  Heat recovery recycles heat into the booster heater 

and reduces steam exiting the machine

Model Description

iv

Summary of Contents for MD2000-VHR























































Reviews:

No comments

Brands by name

Popular brands

Load more brands