Moyer Diebel MD2000-VHR, Installation, Operation & Parts Manual

Page: 11 / 54

Installation
Converting Straight-through to Corner Operation
wall
wall
A
A
To convert track guides and door-lift for corner operation:
1.
Remove the rack guide (A); save the fasteners.
Move (A) and re-attach as shown in the illustration at right.
2.
Slide a dish rack through the machine to check guide rack
clearance. The dish rack should move smoothly without
binding or tipping on the guides.
3.
Disconnect the door-lift bracket (B) connecting the front and
wall-side door and discard. Re-install bracket bolts and lock
washers.
4. Disconnect the door linkage arm (C) from the wall-side door
and discard. Re-install the white roller (D) and hardware.
5.
Disconnect the door linkage arm (C) from the other door
Do not discard.
6.
Lift the door handle up until the springs relax.
7. Adjust the door spring hooks (E) located at the rear of
dishwasher to reduce door spring tension until the front
and side doors open and close without binding.
B
Remove the door-lift
bracket connecting the
front and wall-side
doors.
E
Re-adjust the door springs. Ensure doors
open and close without binding.
Remove the door-linkage
arm from the wall-side
door and discard.
Re-install the white roller
with existing hardware.
C D
Fig. 3
3