manualshive.com logo in svg

Moyer Diebel MD-1000HT, Installation Manual With Service Replacement Parts

Share
Download
Moyer Diebel MD-1000HT Installation Manual With Service Replacement Parts Download Page 36

30

Installation Guide ____________

;

Water Connection  MD-1000LT

 

MD-1000LT • Water Connection

(3/4" NPT line strainer not supplied)

Water supply:

3/4" NPT hot water supply (140°F/60°C minimum)
(35 psi/241 KPa static pressure) 7-10 psi/48-69Kpa flow pressure

Note:

Under NO circumstances, may the installing plumber connect a water supply line to the
dishwasher that is less than 3/4" NPT in size.

Note:

The following components 

are not required

 for proper dishwasher operation, but are

highly recommended

, because they make servicing of the dishwasher much faster.

Install the following components (not supplied) in the hot water supply line:

1) 3/4” or larger water shut-off valve near the machine in the water supply line.
2) ASSE 1010 Water hammer arrestor upstream from the shut-off valve.
3) Pressure gauge 0-60 PSI minimum downstream from the PRV.
4) Temperature gauge 0-180°F/82°C (not supplied) downstream from the gauge.

Note:

Plumbing installer must connect a 3/4" NPT hot water supply line to the dishwasher.
A 3/4" pressure regulating valve (PRV) (not supplied) must be installed in the water
supply line and adjusted to (35 psi/241 KPa static pressure) 7-10 psi/48-69Kpa flow pressure

Summary of Contents for MD-1000HT

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands