Moxy PC Application
The Moxy PC Application is used to set up the Moxy and to download data that
is stored on the Sensor. Go to
www.moxymonitor.com/downloads
to
download the latest version of the PC application.
1)
Connecting to the Moxy Sensor (Sensor can be On or Off)
a.
Use a micro USB cable to connect the Sensor to the PC. The
first time you connect a sensor to a PC, it will automatically
download the communication driver. This can take several
minutes.
b.
Start the Moxy PC Application and Click on Connect.
c.
If there is no COM port showing next to the Connect button
that means the driver download failed. Contact tech support.
2)
Setting the Time
a.
Refresh shows the current time on the Moxy Sensor.
b.
Set sets the Moxy sensor time to match the PC clock time.
c.
Note that some display devices will automatically set the Moxy
Sensor time to match the display device time when they pair.
3)
Versions – These boxes show the Firmware version and the calibration
information on the Moxy Sensor. Use to Update Firmware button to
load new versions of Firmware on the sensor.
4)
ANT+ Profiles – Select the radio button to set which ANT+ profile the
Sensor will use to transmit data.
5)
Update Mode – Select the radio button to set the data update rate
mode.
6)
Use the Download and Clear Data buttons to for downloading data from
the Sensor and deleting the data on the Sensor.
8
