Charging the Moxy Sensor
Moxy can be charged with any micro USB charger that has the following
ratings:
o
UL or CE markings
o
5V DC Output
o
Output Current between 300 mA and 1.0 A
Moxy can also be charged with a computer through a micro USB cable.
Charge time from completely dead to full charge is about 2 hours
The green indicator LED will blink about once per second during normal
charging and it will turn off when the sensor is fully charged.
A short click of the On/Off button will cause the green indicator LED to
blink a certain number of times to indicate the current charge level. 4
blinks indicate fully charged with 3, 2, or 1 blink indicating a lower level
of charge.
The green indicator LED will blink rapidly to indicate a charging fault. To
clear the fault, unplug the micro USB charger cable, make sure the
sensor is turned off, and plug the micro USB charger cable back in. If
the fault persists, the sensor must be returned to the factory for repair.
6
