background image

 

 

 

© 2014 Maka Technologies Group. All Rights Reserved.  

 
 

Caution 

 

Failure to comply with safety cautions and regulations can cause injury or property damage 

 

Do not expose the device to heavy smoke or fumes 

Doing so may damage the outside of the device or cause it to malfunction. 
 

If you notice strange smells or sounds coming from your device or the battery, or if you see smoke or liquids 
leaking from the device or battery, stop using the device immediately and take it to a Maka Service Centre 

Failure to do so may result in fire or explosion. 

 

Do not store your device in very hot or very cold areas. It is recommended to use your device at temperatures from 
0 °C to60 °C and  humidity from 10% to 80% 

Doing so may cause the screen to malfunction, result in damage to the device, or cause the battery to explode. 

 

Do not use your device or applications for a while if the device is overheated 

Prolonged exposure of your skin to an overheated device may cause low temperature burn symptoms, such as red spots 
and pigmentation. 

 

Do not drop your device or cause impacts to your device  

 

Your device may be damaged or may malfunction. 

 

If bent or deformed, your device may be damaged or parts may malfunction. 

Ensure maximum battery and charger life 

 

Avoid charging your device for more than a week, as overcharging may shorten battery life. 

 

Over time, unused device will discharge and must be recharged before use. 

 

Disconnect the charger from power sources when not in use.  

 

Leaving batteries unused over time may reduce their lifespan and performance. It may also cause the batteries to 
malfunction or explode, or cause a fire.

  

 

Your device may wear out over time. Some parts and repairs are covered by the warranty within the validity period, but 
damages or deterioration caused by using unapproved accessories are not. 

Do not disassemble, modify, or repair your device 

 

Any changes or modifications to your device can void your manufacturer’s warranty. If your device needs servicing, take 
your device to a Maka Service Centre. 

 

Do not disassemble or puncture the battery, as this can cause explosion or fire. 

 

Turn off the device before removing the battery. If you remove the battery with the device turned on, it may cause the 
device to malfunction. 

When cleaning your device, mind the following 

 

Wipe your device or charger with a towel or an eraser. 

 

Do not use chemicals or detergents. Doing so may discolour or corrode the outside the device or may result in electric 
shock or fire. 

Do not distribute copyright-protected material 

Do not distribute copyright-protected material without the permission of the content owners. Doing this may violate copyright 
laws. The manufacturer is not liable for any legal issues caused by the user’s illegal use of copyrighted material. 

 
 

Summary of Contents for power-resq
























Reviews: