Moxi media center, User Manual

Page: 74 / 109

all DVRs were not created equal
Getting connected
© 2006 by Digeo, Inc. All rights reserved. Media Center User Guide
67
7
Wireless data connection
If a wired connection is not possible, connect the media center to a
wireless game adapter or wireless bridge manufactured by the same
company as your wireless router, see figure 54. An Internet connection
is not required for PC Link.
Figure 54: Wireless home network connection to the media center
Adding components
To add components to the TV connected to the media center, such as
a DVD player or VCR, refer to the manufacturer’s documentation for
each device. For digital VCRs, see
Archiving to a VCR or DVCR on
page 50.
For other additional components, use a secondary connection to the
TV. Do not interrupt the primary signal from the media center to the
TV (see figure 55). If the content is protected by digital copyright pro-
tection systems, the picture on the additional component may appear
distorted or not at all.
Figure 55: Installation of secondary components
Secondary digital monitors can be connected via the IEEE 1394 ports
but do not display the Moxi Menu or any other user interface graphics
You must use the Ethernet port on the rear of the media center. A
USB to Ethernet connection is not supported.
!
1 3 2 4 WAN Power Reset
Wireless Router
Wireless
communication
Power
USB
V Y
L P
B
R P R
CABLE IN
Media Center
Power
Wireless Bridge
(802.11 b or g)
CAT-5 network cable
Secondary
device
Media Center
TV
Signal flows from the
media center to the TV and
also to the VCR or other
secondary device. Never
install the secondary
device in the primary
connection between the
media center and the TV.