WDR-3124A
Web Console Configuration
3-2
Accessing the Web Console
You can use a web browser to access the web console on the WDR-3124A. The web console is best viewed with
Microsoft
®
Internet Explorer 7.0 or 8.0 with JVM (Java Virtual Machine) installed.
1.
Use either a straight-through or crossover Ethernet cable to connect the WDR-3124A to a computer.
2.
Configure the IP address of the computer to be on the same subnet as the WDR-3124A.
For example, if the WDR-3124A is using the default IP address of 192.168.127.254 with a subnet mast of
255.255.255.0, set the IP address of the computer in the 192.168.127.xxx range.
NOTE
If you reset the WDR-3124A to the factory default settings, the IP address will be reset to
192.168.127.254
.
3.
Open a web browser on the computer and enter the IP address of the WDR-3124A in the address field. The
following figure shows an example.
4.
The web console login page appears. Enter the user name (the default is
admin
) and password (the default
is
root
) and click
Login
.
NOTE
For security reasons, we strongly recommend that you change the default password (in the web console, click
Maintenance
Password
).
5.
You may need to wait for a few moments for the web page to load on your computer.
Note that the model name and IP address of the WDR-3124A are shown in the title bar of the web page. You
can use this information to identify multiple WDR-3124A units on a network.
Summary of Contents for WDR-3124A
Page 50: ......