Moxa VPort 26A-1MP
System Configuration
4-38
NOTE
The applications described in the following sections will only work properly if either Event Alarms are active
all the time or Event Alarms are active based on weekly schedule is Selected.
Setting
Description
Default
□Sun □Mon □Tue □Wed
□Thu □Fri □Sat
Select the weekday for scheduling event alarms.
None
Begin 00:00
Set the start time of the event alarm.
00:00
Duration 00:00
Set the duration for the event alarm to be active.
00:00
NOTE
Administrators can use the following steps to set up an event schedule:
1.
Select Event Type
2.
Enable “Event Alarms are active based on weekly schedule”
3.
Select the weekday
4.
Set the start time
5.
Set the duration this event will be active.
6.
Save
Event Alarm
Four kinds of event alarm are provided by the VPort for building an intelligent video surveillance system.
Alarm Type
Triggered Condition
Triggered Action
Video Motion Detection
(VMD)
VMD 1
VMD 2
VMD 3
1. Trigger Relay
2. Email
3. FTP
4. HTTP Event Server
5. Record on SD card
Digital Input
High, Low, Rising and Falling
1. Trigger Relay
2. Email
3. FTP
4. HTTP Event Server
5. Record on SD card
CGI Event
The CGI trigger message
1. Trigger Relay
2. Email
3. FTP
4. HTTP Event Server
5. Record on SD card
Camera Tamper
Camera tampering by painting, blocking,
defocusing, or changing the position.
1. Trigger Relay
2. Email
3. FTP
4. HTTP Event Server
5. Record on SD card
