Moxa VPort 26A-1MP
System Configuration
4-2
System Configuration by Web Console
System configuration can be done remotely with Internet Explorer. To access the server, type the system
configuration URL, http://<IP address of Video Server>/overview.asp, to open the configuration main
page.
There are six configuration categories: System, Network, DynaStream, Video, Audio, and Alarm. A
description of each configuration item is shown in the table below:
Category
Item
Description and Contents
System
General
Set Host Name and Date/Time
Accounts
Administrator, User, and Demo Account Privileges Management
Local Storage
Configure the local storage settings
Diagnosis
Self-diagnostic report with system, communication, power, and LED
status
System Log
System Log and operation information
System Parameter
System parameter information and Import/Export functions
Firmware Upgrade
Remote Firmware Upgrade
Factory Default
Reset to Factory Default
Reboot
Device will reboot for restarting system
Network
General
The IP network settings of this VPort
SMTP Server
Set up Primary and Secondary SMTP Server and e-mail accounts
FTP Server
Set up the Primary and Secondary FTP Server
DDNS
Configure Dynamic DNS service
UPnP
Enable UPnP function
Multicast Setting
Set up Multicast (IGMP) Streaming
Accessible IP
Set up a list to control the access permission of clients by IP address
SNMP
Configure the SNMP settings
ToS
Configure ToS (Type of Service)
HTTP Event Server
Set up the HTTP Event Server to send the event alarm action
Modbus/ TCP
Enable Modbus/TCP function
IEEE 802.1X
Configure IEEE 802.1X function
Telnet
Configure Telnet
LLDP
Configure LLDP
Video
Image Settings
Configure the information of video image
Camera Setting
Configure the attributes of video image
ROI
Configure the ROI(region of interest) settings
Privacy Mask
Configure the Privacy Mask settings
Video Performance
Set up the Encode Standard(MJPEG or H.264), Size (Resolution), FPS and Video
Quality
Audio
Audio Setting
Configure the Audio Source
PTZ
Digital PTZ
Configure the Digital PTZ settings
DynaStrea
m
Basic
setup the video frame rate change once an alarm or event is triggered
Conditions
setup the event/ alarm to trigger the Dynastream, and the behavior
after being triggered
Alarm
System
General settings of alarm
Basic
Basic settings of event alarm
Schedule
Schedule setting of event alarm
Event
Alarm
Digital input
Configure the Digital Input Alarm
Motion
Detection
Configure the motion detection alarm
CGI Event
Set up the CGI event alarm
Camera
Tamper
Configure the camera tamper alarm
