VPort 2310 User’s Manual
Getting Started
2-3
NOTE
After powering on the VPort 2310, wait a few seconds for the POST (Power On Self Test) to
run. The IP address will be assigned when the CONNECT LED is lit.
Using IP Reporter
1.
Run
IPReporter.exe
to search for the VPort. After the IP Reporter window opens, you may
also click on the Search button to initiate a search.
2.
When the search has concluded, the MAC address and IP address of the VPort will be listed
in the IP Reporter window.
NOTE
If the VPort has been assigned an IP address, the
Assigned
status will be listed as
Yes
. If the
VPort has not been assigned an IP address, the Assigned status will not be listed as Yes. In this
case, check to see if the VPort’s firmware version supports the DHCP installation function, or if
there is any problem with the network environment.
