VPort 2141 Video Encoder User’s Manual
System Configuration
4-22
Step 3-3:
Set up the
Trigger action
DO1:
▼
(Disable, Close, Open)
DO2:
▼
(Disable, Close, Open)
DO3:
▼
(Disable, Close, Open)
DO4:
▼
(Disable, Close, Open)
Send Snapshot on
□
Video 1
□
Video 2
□
Video
3
□
Video 4
Send
▼
(0,1,2,3,4,5,6)
pre-event image(s) when event
occurs
Take
□
snapshot(s) with
□
seconds interval after the event
□
Send snapshot while trigger
condition(s) match
□
Disable max frame rate setting
for
□
second(s) while trigger
condition(s) match
Step 4:
Choose the snapshot
images sending method
if you choose the
upload snapshot trigger
action or sequential
mode
○
Send snapshot by email
○
Send snapshot by FTP
□
FTP put snapshots with date and time suffix
Step 5:
Click
Save
to enable the applications
Weekly schedule
The Weekly schedule is provided for daily security applications. Select any weekday from
Monday to Friday with the daily schedule set from 08:00 am to 20:00 pm when no one is available
to perform event checking. If the security system is installed in an office for which no one is
present on nights or weekends, administrators can still set the time period as above, from 08:00 am
to 20:00 pm, but remember to select
All the time except for the above schedule
to let the
program run during nights and weekends.
ATTENTION
You must select
Weekly schedule
or
All the time except for the above schedule
. Otherwise,
the applications described in the following sections will not work properly.
