VPort 2141 Video Encoder User’s Manual
System Configuration
4-11
The Accessible List allows you to add or remove “Legal” remote host IP addresses to prevent
unauthorized access. Access to the VPort is controlled by IP address. That is, if a host’s IP address
is in the accessible IP table, then the host will be allowed access to the VPort. Administrators can
allow one of the following cases by setting this parameter.
Allow List
The VPort can use the allow list to limit which clients can access the video stream. Administrators
can add ten IP address ranges to forbid access to these clients.
Deleting the Allow List
VPort also supports a deny list, with a maximum of 10 elements. The deny list is given a higher
priority than the allow list. If a client is in both the deny list and allow list, the client will be not
allowed to access video stream.
Refer to the following table for more configuration examples.
Allowable Hosts
Start IP Address
End IP Address
Any host
Blank
Blank
192.168.1.120 192.168.1.120
192.168.1.120
192.168.1.1 to 192.168.1.254 192.168.1.1
192.168.1.254
192.168.0.1 to 192.168.255.254 192.168.0.1
192.168.255.254
Video
On the
Video
page, checkmark the
Enable
box to allow the VPort 2141 to show the camera’s
video images. The various settings are described in the following subsections.
