Moxa Technologies UC-7400-LX Plus User Manual Download Page 68

Page: 68 / 88

UC-7400-LX Plus User’s Manual

Managing Communications

4-25

On machine OpenVPN A, modify the remote address in the configuration file,

/etc/openvpn/tun.conf

# point to the peer

remote 192.168.8.174

dev tun

secret /etc/openvpn/secrouter.key

cipher DES-EDE3-CBC

auth MD5

tun-mtu 1500

tun-mtu-extra 64

ping 40

ifconfig 192.168.2.173 192.168.4.174

up /etc/openvpn/tun.sh

Then modify the routing table in

/etc/openvpn/tun.sh

script file.

#----------------------------------Start------------------------------
#!/bin/sh

# value after “-net” is the subnet behind the remote peer

route add -net 192.168.4.0 netmask 255.255.255.0 gw $5

#---------------------------------- end ------------------------------

On machine OpenVPN B, modify the remote address in the configuration file,
/etc/openvpn/tun.conf.

remote 192.168.8.173

dev tun

secret /etc/openvpn/secrouter.key

cipher DES-EDE3-CBC

auth MD5

tun-mtu 1500

tun-mtu-extra 64

ping 40

ifconfig 192.168.4.174 192.168.2.173

up /etc/openvpn/tun.sh

Then modify the routing table in

/etc/openvpn/tun.sh

script file.

#----------------------------------Start------------------------------
#!/bin/sh

# value after “-net” is the subnet behind the remote peer

route add -net 192.168.2.0 netmask 255.255.255.0 gw $5

#---------------------------------- end ------------------------------

NOTE

The parameter

ifconfig

defines the first argument as the local internal interface and the second

argument as the internal interface at the remote peer.

NOTE

is the argument that the OpenVPN program passes to the script file. Its value is the second

argument of ifconfig in the configuration file.

Summary of Contents for UC-7400-LX Plus
























































































Search results

Summary of Contents for UC-7400-LX Plus

Reviews:

Related manuals for UC-7400-LX Plus

Brands by name

Popular brands

Moxa Technologies UC-7400-LX Plus, User Manual

Search results

Summary of Contents for UC-7400-LX Plus

Reviews:

Related manuals for UC-7400-LX Plus

Brands by name

Popular brands