UC-7400-LX Plus User’s Manual
Getting Started
2-9
To configure the WLAN for IEEE802.11g:
1.
First unplug the CardBus wireless LAN card.
2.
Use the command #
vi /etc/networking/interfaces
to open the “interfaces” configuration file
with vi editor, and then edit the 802.11g network settings (the wireless interface name should
be “eth2” on the UC-7400 Plus).
# We always want the loopback interface.
auto eth0 eth1 eth2 lo
iface lo inet loopback
# embedded ethernet LAN1
iface eth0 inet static
address 192.168.3.127
network 192.168.3.0
netmask 255.255.255.0
broadcast 192.168.3.255
# embedded ethernet LAN2
iface eth1 inet static
address 192.168.4.127
network 192.168.4.0
netmask 255.255.255.0
broadcast 192.168.4.255
# embedded ethernet LAN3
iface eth2 inet static
address 192.168.5.127
network 192.168.5.0
netmask 255.255.255.0
broadcast 192.168.5.255
3.
Additional WLAN parameters are contained in the file
RT2500STA.dat
. To open the file,
navigate to the RT2500STA folder and invoke vi, or type the command
#vi
/etc/Wireless/RT2500STA/RT2500STA.dat
to edit the file with vi editor. Settings options
for the various parameters are listed below the figure.
[Default]
CountryRegion=0
WirelessMode=0
SSID=MOXASYS
NetworkType=Infra
Channel=0
AuthMode=OPEN
EncrypType=WEP
DefaultKeyID=1
Key1Str=1111111111
Key2Str=
Key3
Key4
WpaPsk=abcdefghijklmnopqrstuvwxyz
TXBurst=0
TurboRate=0
BGProtection=0
ShortSlot=0
Key3
Key4
WpaPsk=abcdefghijklmnopqrstuvwxyz